*還在用山寨版的改裝嗎?
*Modified version of the cottage still use it?
*貨車冷氣風扇與專用水箱電子風扇的差別~如何區分?
*Air-conditioning fan and water tank trucks dedicated fan of the difference between electronic, how to distinguish?
--------------------------------------------------------------------------------------------------
爲甚麼冷氣風扇不可以當水箱風扇使用?
Air-conditioning fan and water tank trucks dedicated fan of the difference between electronic, how to distinguish?
Why air conditioning fan can not use the fan when the water tank?
1.風壓不足:
一般冷氣散熱片厚度約1.5~2 cm
多數車種水箱厚度加上冷氣散熱片,厚度多在10 cm以上,需要較高的風壓克服。
1. Air pressure less than:
General air-conditioning heat sink thickness of about 1.5 ~ 2 cm
Most vehicles with air-conditioning heat sink radiator thickness, the thickness of more than 10 cm or more, require higher pressure to overcome.
2.耐溫不足~零件易老化故障
一般冷氣散熱排風溫度多在50度以下
水箱散熱排風溫度高達100度以上
Cooling air exhaust temperature and more generally below 50 ℃, water cooling exhaust temperatures up to 100 ℃ or more.
3.葉片單薄、易斷裂
葉片多為細長條型 ,容易因震動、熱疲勞而斷裂。
3. blade thin, easily broken
Leaves mostly slender bar, susceptible to vibration, thermal fatigue and fracture.
4.亂流、噪音大 、浪費動力
葉片與集風罩沒有經過"流場最佳化設計",亂流與風切聲交雜,浪費動力=浪費錢。
4 turbulence, noise, waste power
Cover and set the wind vane has not been "optimized design flow", turbulence and wind noise are mixed, a waste of power = waste of money.
5.異念科技改裝的 BMW 車系
直接使用原廠電腦訊號
不需要切水管接三通
更省油
完整度更高
5. "Imagination Science & Technology" modified BMW cars
Directly to the computer using the original signal
Do not cut the water pipe connection tee
More fuel-efficient
Complete a higher degree
以下為三種失敗的整流罩案例
沒有經過流場動向考量容易照成局部過熱/產生亂流/噪音
有人標榜集風罩使用鋁製的因為鋁散熱最好~乍聽之下好像有道理 導熱效果鋁>不繡鋼>朔鋼
但是實務上是錯誤的集風罩好壞關鍵是在形狀~讓氣流能夠平均的作用在水箱上
集風罩製作最大的禁忌就是有直角的地方~容易照成局部過熱/產生亂流/噪音
水箱的關鍵才是材質
不是黑色浪管就是防火套管~用打火機燒就知道!
雙B 的價值被一個800元的風扇完全搞砸~這不是雙B該有的"品味"
但事實上
留言列表